Welcome to our store - Tel: 0207-965-7502. Contact Us

EXPERT ADVICE • FINANCE OPTIONS • INSTALLATION SUPPORT

Using a Pizza Stone in a Combi Oven: Setup and Settings

Pizza baking on a stone in a combi oven

Simon Durham |

Yes, you can use a pizza stone in a commercial combi oven, provided it fits the oven’s shelves, sits on a rack and never on the chamber floor. Preheat it with the oven on dry hot air, keep steam off for most pizza styles, and load quickly. This guide covers the stone, the placement, the settings and the care routine for a working kitchen.

Thecommercialovenstore
Find the Right Combi Oven
Explore commercial ovens from Rational and Unox, with expert advice to help match equipment to your kitchen's needs.
Visit

TL;DR

  • A stone works in a combi oven when it is sized for your shelves (Gastronorm or 60 × 40 cm) and sits on a rack, never on the oven floor.
  • Preheat the oven and stone together, allowing roughly 30 to 45 minutes, so the underside of the base browns as well as the top.
  • Use hot air with a dry chamber for par-baked bases and ready-topped pizza. Steam tends to make the base chewy.
  • Never soak, wash with chemicals or oil a stone. Let it cool, then brush it clean.
  • Check your oven’s manual and the stone maker’s guidance before the first service.

Table of Contents

Why a stone helps in a combi oven

A combi oven is built to move hot air and steam around food quickly. That is perfect for roasting, regenerating and baking, but a pizza needs something extra: strong heat from below. A stone stores heat and passes it straight into the dough by contact, so the base crisps while the air above cooks the toppings.

Without a stone, a pizza sitting on a perforated tray or a grid is heated mostly by air. The top finishes first and the base can stay pale. A preheated stone closes that gap. For a café selling par-baked pizza at lunch, or a restaurant that adds a pizza to a bar menu, it is a low-cost way to get a base that holds up on the plate.

It suits particular styles best:

  • par-baked crusts finished with toppings
  • bases with sauce, cheese and a few toppings
  • ready-topped frozen pizza
  • flatbreads and focaccia-style bakes

For very high volumes of Neapolitan-style pizza, a dedicated pizza oven is a different tool. If pizza is one item among many on your menu, a combi with a stone is a sensible way to cover it without adding another piece of equipment.

Choosing a stone that suits a commercial oven

Size and fit

Fit comes first. The stone must slide into the oven’s shelf runners like any other tray, so measure your oven’s shelf format before you buy. Most combi ovens take Gastronorm trays, and many bakery-oriented models take baker’s standard 60 × 40 cm. A stone that is too wide can catch on the runners or block airflow around the edges. Leave a small gap on each side so hot air can circulate.

Weight matters too. A thick stone is heavy, and the rack it sits on must carry it comfortably when the stone is loaded with a pizza. Check the maximum shelf load in your oven’s documentation.

Material

Cordierite is the usual choice for pizza stones. According to a ceramics manufacturer’s explanation, it resists thermal shock, stays stable at high temperatures and is porous enough to let moisture escape from the base of the pizza. In a busy kitchen where the stone goes from cold to very hot and back again, thermal shock resistance is the property to look for.

Thickness

A thicker stone holds more heat and recovers less quickly between pizzas, but it needs longer to preheat. A thinner stone heats faster and suits lower volumes. For service with short gaps between orders, match thickness to your throughput rather than assuming heavier is better.

Where to put the stone

Place the stone on a rack, not on the floor of the chamber. A stone left directly on the oven floor can trap heat and damage the oven. That includes the drip area and any heating element, so keep it off anything that is not a shelf runner.

Which rack position is best depends on your oven:

  1. Dedicated pizza position: if your oven or its manual identifies one, use it. It is set for clearance and heat distribution.
  2. Lower-middle runner: a good default. The stone sits close enough to the lower heat to build intense base heat, with enough room above for the pizza to rise and brown.
  3. Single stone per oven for most kitchens: two stones in a chamber can restrict airflow. If you want two, check that the spacing leaves room for the pizzas and the fan.

Leave enough space to slide a peel in and out and to rotate a pizza if you need to. If you are planning a new oven for a space, our guide to commercial oven placement covers clearances and siting in UK kitchens, and our piece on combi oven sizes helps you match tray format to your menu.

Settings that work with a stone

The settings below are starting points. Combi ovens differ by manufacturer and generation, so follow your oven’s instructions and the stone maker’s guidance, then fine-tune. Our note on combi oven programming explains how small 2 to 5°C and 1 to 2 minute adjustments can be saved as programmes.

Setting Starting point Why
Mode Hot air (convection), no steam Keeps the chamber dry so the base crisps
Chamber humidity Dry, with dehumidification on if your oven has it Removes moisture released by cheese and sauce
Temperature Around 250°C for par-baked and ready-topped pizza The highest practical heat for a quick bake
Time Roughly 4 to 7 minutes for par-baked or frozen pizza; longer for large, thick or heavily topped Depends on dough thickness and toppings
Preheat Oven and stone together, about 30 to 45 minutes The stone heats more slowly than the air

A specialist stone supplier advises preheating the oven and stone together at the highest temperature, using top and bottom heat and convection if available. Thick or heavily topped pizzas often do better with a slightly lower temperature, around 10 to 20°C below your thin-pizza setting, so the top does not scorch before the base is done.

Reading the bake

Lift a corner with a peel. The underside should be golden and firm, not translucent or wet. If the top is ready and the base is pale, the stone was not hot enough: extend the preheat next time. If the base is fine but the top is dark, drop the temperature slightly or move the stone down a runner. Rotate a pizza only if your oven has a known hot spot or the browning is uneven.

How long to preheat

The air in a combi oven reaches temperature quickly, and the display will tell you it is ready long before the stone is. A stone generally needs around 30 to 45 minutes to reach baking temperature, depending on oven performance. A thicker stone may need longer.

The practical routine for a kitchen:

  1. Put the stone in the cold oven before you switch on, so it heats gradually with the chamber.
  2. Start the preheat at your pizza temperature, with the fan running.
  3. Allow at least 30 to 45 minutes before the first pizza.
  4. If you have an infrared thermometer, check the stone’s surface rather than trusting the oven display.

Build this into opening checks. If the oven is also used for roasting or baking earlier in the day, plan the pizza window and allow a full preheat after any steam cycle, once the chamber is dry again.

Steam and humidity

For most pizza on a stone, keep steam out. Moisture in the chamber means moisture on the dough, and the base absorbs it and turns chewy. Hot air with a dry chamber, and dehumidification if your oven offers it, is the safest approach. If you have just run a steam programme, dry the chamber before loading pizza.

Some chefs working with fresh, raw dough add a short burst of humidity in the first minutes to help the crust rise, then switch to dry heat. That is an advanced adjustment, and it depends on your oven allowing manual steam control. If you try it, keep it brief and test on a trial pizza outside service. For par-baked and ready-topped products, dry heat from the start is the dependable choice.

Steam and dry heat options for pizza

If your kitchen is deciding between a combi and other steaming equipment for a wider menu, our comparison of a combi oven versus a steamer sets out how each fits a site.

Loading, service and turnaround

The stone is at its best when you work quickly and consistently.

  • Load fast. Open the door, slide the pizza onto the stone with a peel, and close the door immediately. A long open door drops the temperature and softens the dough.
  • Mind the temperature drop. A heavy, cold pizza placed on a hot stone cools it locally. Let the stone recover between pizzas when you are busy.
  • Between pizzas. Leave the oven running. If your oven lets you control convection and the top heater separately, switching them off for successive pizzas stops the top from over-browning. If not, leave both on.
  • Use a peel with a light dusting of flour or semolina so the pizza slides cleanly.
  • Keep pizza away from the door seal and fan area as you load.

Plan the rush. If you expect ten pizzas in a quarter of an hour, a single stone and a standard combi will be the limit, so pre-build and stage the bases before service.

Looking after the stone

A stone is porous, and that is the property that makes it work. It also means it absorbs liquids and chemicals. The manufacturer guidance we have seen is consistent: do not submerge it, do not put it in a dishwasher, and do not use chemicals or oil on it. Let it cool before you take it out of the oven, then brush off residue with a dry brush or cloth.

A routine that fits a shift:

  1. Brush or wipe loose flour and crumbs during service when the stone is safe to handle.
  2. At close, switch off and let the oven and stone cool fully.
  3. Remove the stone and brush it clean.
  4. Dry-wipe the chamber and run your normal oven cleaning programme with the stone out, using the correct detergent for the combi.
  5. Store the stone flat in a dry place, or return it once the chamber is fully clean and dry.

Dark marks and stains are normal and do not affect performance. Do not try to scrub them out. If a stone cracks, retire it, as a split stone can break in service.

Our perspective

We see the same pattern in kitchens that add pizza to a combi menu: the oven is capable, but the base lets the dish down because the stone was not given time to heat, or steam crept into the chamber. Both are easy to fix, and both come down to routine rather than new kit.

Our advice is to treat the stone as part of the oven’s set-up, not as an afterthought. Choose a stone that fits your shelf format, give it a proper preheat, and save a dry-heat pizza programme so every member of the team bakes the same way. A combi gives you that repeatability, which is what a busy line needs.

Before you buy, think about the full menu the oven will serve. Pizza is one use among roasting, baking, regenerating and more. That is why we match ovens to a kitchen’s real workload, including site fit such as ventilation, which we cover in our guide to pizza in a combi oven. Our team can advise on capacity, tray format and installation so the oven you choose suits the way you cook.

Simon

Choosing a combi oven for pizza and more

If you are planning a new oven, the right model depends on tray format, capacity and how much of your menu is pizza. We stock combination ovens from the Rational iCombi range, such as the Rational iCombi Pro 10-1/1 electric combi for compact kitchens and the iCombi Pro 20-1/1 for higher output. Bakery-focused kitchens may also want to look at our bakery ovens.

Thecommercialovenstore

Our team offers expert advice and an installation service, and we support purchases with flexible payment options through iwocaPay as well as lease finance. Browse the commercial ovens range or talk to us through our homepage about the right oven for your kitchen. Our guide to combi oven capacity can help you avoid installation delays.

FAQ

Can I put a pizza stone on the bottom of a combi oven?

No. Keep the stone on a rack rather than the chamber floor, because heat can build up beneath it and damage the oven. Choose a stone that fits your Gastronorm or 60 × 40 cm shelves and follow your oven’s manual.

What temperature should I use for pizza on a stone in a combi oven?

A typical starting point for par-baked or ready-topped pizza is around 250°C in hot-air mode without steam, with a bake of roughly 4 to 7 minutes. Thicker or heavily topped pizzas need a little longer and sometimes a slightly lower temperature. Always follow the product and oven manufacturers’ instructions.

Should I use steam when baking pizza on a stone?

For most pizza, no. Steam adds moisture to the base, which can turn it chewy. Use dry hot air, switch on dehumidification if your oven has it, and dry the chamber after any steam programme before you load pizza.

How do I clean a pizza stone used in a commercial oven?

Let it cool fully, then brush off residue with a dry brush or cloth. Do not soak it, put it in a dishwasher, use chemicals or oil it, because the porous material absorbs liquids. Clean the chamber separately with the stone removed.

Sources